Specifications

Microcontroller based Governor - MEG 601 - Specifications

	Power Supply Voltage
	Diesel Electric Locos - 50VDC to 90VDC. 20VDC for 0.8 seconds during cranking.
	Speed Settings
	8 Different Speed Settings selectable by Notch from Driver Desk.
	Accuracy of Control
	±3 RPM of desired Engine RPM for the notch
	Display Parameters
	Notch Position, Engine RPM
	Fuel rack position
	Booster (Turbo) Air Pressure
	Lube Oil Pressure
	Fuel Oil Pressure
	Load Control Position
	Pressure Sensor Range / Accuracy
	Lube Oil Pressure - 0 to 5 kg / cm²
	Fuel Oil Pressure - 0 to 5 kg / cm²
	Booster (Turbo) Air Pressure - 0 to 3 kg / cm²
	Speed Sensing Mechanism
	Tachogenerator or Speed Sensor mounted on Engine
	Odometer Range Accuracy
	8 digit with 1 km resolution ± 0.1% =1 km of the distance travelled
	Wheel Diameter Adjustment
	Possible to adjust Wheel Diameter in 1 mm steps
	Dial Illumination
	Through LEDs with adjustable illumination level (10-90%)
	Inputs
	Speed Sensor - 2 inputs for redundancy
	Digital inputs - All inputs are optically isolated, reverse polarity and surge protected operating at 72VDC +30%, -40%
	Display
	32 character (16x2) Alpha-numeric Back lit LCD display for Engine Parameters, fault messages and diagnostic messages
	Communication Interface
	• RS 485 for communication with MEP-660 Microprocessor based Locomotive Control System • RS 232 for interface to PC / Laptop
	Dimensions
	Control Unit 141 mm x 215 mm x 160 mm
	Actuator Unit
	Weight
	Control Unit - 4.5 Kgs
	Actuator Unit -

Downloads